How To Operate; Assembly/ Operation - Vax V-081 Series Instruction Manual

V-081 Series User Guide.qxd:User Guide
CLICK
Fig.3/5
Press in the appropriate release button and pull the tubes
apart with a downward movement to take the extension
tube off again (Fig.3/6).
Release button
Fig.3/6
All manuals and user guides at all-guides.com
Release button
Steam trigger
22/4/10 17:26 Page 5
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308

4. How to operate

WARNING: The steam cleaner must always be
!
disconnected from the mains when filling or
topping up with water.
Filling the tank
The steam cleaner has a built-in water tank holding 1.6
litres. Unscrew the tank cap (Fig.4/1) by pressing the cap
down and simultaneously turning it anti-clockwise. Use
the funnel and measuring jug supplied when filling with
water (Fig.4/2).
Fig.4/1
Fig.4/2
NOTE: Only fill with pure water without additives of any
kind, e.g. perfume, cleaning agents, alcohol, as they could
damage the machine and make it dangerous to use.
It is advisable to use limescale deposits if your water is
very hard (over 2.5mmol/l or 21°dH). Otherwise boil the
water first to extend the life of the steam cleaner.
IMPORTANT: Do not exceed the maximum
!
quantity of 1.6 litres when filling the tank!
Screw the tank cap firmly back on by turning it clockwise
while pressing down.
NOTE: The heating up time will be shortened if warm
water is used when filling.
5

assembly/ operation