Advertisement

1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. COOKTOP MEASUREMENTS ............................................................................................... 6
3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS .................................... 7
3.1 Mounting ......................................................................................................................................................... 8
4. ELECTRICAL CONNECTION ............................................................................................... 10
NOTE: THIS APPLIANCE MUST BE INSTALLED SOLELY AND EXCLUSIVELY BY A QUALIFIED
TECHNICIAN. ANY TECHNICAL PROCEDURES MUST BE CARRIED OUT BY AN AUTHORIZED
TECHNICIAN.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified engineer who is able to
install, commission and test the appliance

Table of Contents

3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S2641TCU and is the answer not in the manual?

Questions and answers

Summary of Contents for Smeg S2641TCU

  • Page 1: Table Of Contents

    Table of Contents 1. IMPORTANT SAFETY INSTRUCTIONS ................. 4 2. COOKTOP MEASUREMENTS ....................6 3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS ........7 3.1 Mounting ................................. 8 4. ELECTRICAL CONNECTION ....................10 NOTE: THIS APPLIANCE MUST BE INSTALLED SOLELY AND EXCLUSIVELY BY A QUALIFIED TECHNICIAN.
  • Page 2: Important Safety Instructions

    Important Safety Instruction 1. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS – Your Safety And the Safety of Others Are Very Important. We have provided many important safety messages throughout this manual and on your appliance. Read all instructions before using your appliance and always obey all safety messages. RECOGNIZE SAFETY INFORMATION This is a safety alert symbol.
  • Page 3 Important Safety Instruction To reduce the risk of fire, electrical shock, injury to persons, or damage when installing the cooktop, some basic precautions must be followed, WARNING including: Read all instructions Proper installation is your responsibility. Have a qualified technician install and ground this appliance, in accordance with these installation instructions.
  • Page 4: Cooktop Measurements

    Instructions for the Installer 2. COOKTOP MEASUREMENTS NOTE: Observe all governing codes and ordinances. Some cabinet and building materials are not designed to withstand the heat produced by the cooktop. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.
  • Page 5: Positioning The Cooktop And Location Requirements

    Instructions for the Installer 3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS NOTE: The following operation requires building and/or carpentry work and must therefore be carried out by a competent technician. Installation can be carried out on various material, such as masonry, metal, solid wood, plastic laminated wood etc.
  • Page 6: Mounting

    Instructions for the Installer MODEL WITH FRAME Cooktop MINIMUM DISTANCE width 30” 2 ” 2 ” 30” ” ” ” ” 758 mm 50 mm 50 mm 758 mm 750 mm 500 mm 145 mm 52 mm 36 ” 2 ” 2 ”...
  • Page 7 Instructions for the Installer Pass the power supply cable through the back of the unit, making sure that it does not touch the bottom casing of the cooktop or the oven (if any) installed below it. 3.1.1 Over empty kitchen unit or drawers Failure to install the double-layer wooden base exposes the user to possible accidental contact with sharp or hot parts.
  • Page 8: Electrical Connection

    Instructions for the Installer 4. ELECTRICAL CONNECTION ELECTRIC SHOCK HAZARD Disconnect power to the junction box before making connection Electrically ground the appliance with green or green-yellow colored WARNING wire Do not ground to a gas pipe Check with a qualified electricial if you are not sure that the range is grounded Do not have a fuse in the neutral or ground circuit FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH,...
  • Page 9 Instructions for the Installer NOTE: Use this method only if local codes allow connecting the cabinet ground conductor to the neutral wire of the power supply cord WARNING ELECTRIC SHOCK HAZARD - Turn power supply off before connecting wires. WARNING Electrically ground the range.

Table of Contents