Table of Contents
Advertisement
8
SAFETY INSTRUCTIONS
y When unplugging the cable, grab the plug and un-
y
plug it, by pulling at the plug. Don't pull at the cord
to unplug the power cord from the power board, as
this could be hazardous.
y When moving the product, make sure you turn
y
the power off first. Then, unplug the power cables,
antenna cables and all connecting cables.
The TV set or power cord may be damaged, which
may create a fire hazard or cause electric shock.
y When moving or unpacking the product, work in
y
pairs because the product is heavy.
Otherwise, this may result in injury.
y Contact the service centre once a year to clean the
y
internal parts of the product.
Accumulated dust can cause mechanical failure.
y Refer all servicing to qualified service personnel.
y
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
y If the product feels cold to the touch, there may be
y
a small "flicker" when it is turned on. This is normal,
there is nothing wrong with product.
y The panel is a high technology display product with
y
resolution of two million to six million pixels. You
may see tiny black dots and/or brightly coloured
dots (white, red, blue, green) at a size of 1 ppm on
the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the
product.
This phenomenon also occurs in third-party prod-
ucts and is not subject to exchange or refund.
y You may find different brightness and colour of the
y
panel depending on your viewing position(left/right/
top/down).
This phenomenon occurs due to the characteristic
of the panel. It is not related with the product per-
formance, and it is not malfunction.
y Displaying a still image for a prolonged period of
y
time may cause image sticking. Avoid displaying a
fixed image on the TV screen for a long period of
time.
y Generated Sound
y
"Cracking" noise: A cracking noise that occurs
when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and
humidity. This noise is common for products where
thermal deformation is required. Electrical circuit
humming/panel buzzing: A low level noise is gener-
ated from a high-speed switching circuit, which sup-
plies a large amount of current to operate a product.
It varies depend-ing on the product.
This generated sound does not affect the perfor-
mance and reliability of the product.
y Do not use high voltage electrical goods near the
y
TV(e.g. electric mosquito-swatter). This may result
in product malfunction.
Advertisement
Table of Contents
