Table of Contents
Advertisement
DDC/CI
SCREEN SAVER
TagB
CARBON SAVINGS
CARBON USAGE
COST SAVINGS
CARBON CONVERT
SETTING
CURRENCY
SETTING*
1
CURRENCY
CONVERT SETTING
HOURS RUNNING*
SELF COLOR
CORRECTION
STAND-ALONE
CALIBRATION
TagC
INFORMATION*
1
*
This item does not reset by FACTORY PRESET (Tag7).
DDC/CI ENABLE/DISABLE: Turns on or off the two way communication and control with
connected PC by video cable.
NOTE: Set DDC/CI to ENABLE when using hardware calibration software over
DisplayPort, DVI or HDMI.
Use the SCREEN SAVER to reduce the risk of image persistence.
MOTION (Default OFF): Screen image moves periodically in 4 directions in order to
reduce the risk of image retention.
Timing for MOTION can be set so the screen image moves in intervals from every
10 to 900 seconds. Timing is set in 10-second increments.
OPTION (Default REDUCED): There are two optional selections.
REDUCED: Screen image is reduced to 95% size and is moved periodically in
4 directions. Screen may appear slightly less sharp than normal. The full image appears
on the display.
NOTE: Some input signals may not be supported by REDUCED.
FULL: Screen image is set to FULL and is moved periodically in 4 directions. Screen
image goes outside of the display area in the direction that it shifts so that a portion of the
image may appear to be cut off.
NOTE: SCREEN SAVER works when MULTI PICTURE is OFF.
Displays the estimated carbon savings information in kg.
Displays the estimated carbon usages information in kg. This is the arithmetic estimation,
not actual measurement value. This estimation is based without any options.
Displays the electricity cost savings in balance.
Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is
based on the OECD (2008 Edition).
Displays electricity pricing (available in 6 currency units).
Adjusts electricity prices-electric energy equivalent in the electrical rate saving
calculation.
1
Show total running time.
Uses the internal backlight color sensor to compensate for a natural color shift that
occurs with age.
Compensates for a typical LCD yellowish color shift due to long-term usage by
optional USB color sensor. See page 32. When you use this function, SELF COLOR
CORRECTION is not necessary.
1
Provides information about the current display resolution. Technical data, including the
preset timing currently being used and the horizontal and vertical frequencies is also
displayed.
English-26
Advertisement
Table of Contents
