Table of Contents
Advertisement
7. Slide down the cable cover (Figure D.1).
8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet.
NOTE:
Please refer to Caution section of this manual for proper selection of AC power cord.
9. Turn on the monitor with the front power button (Figure E.1) and the computer.
10. Refer to the Controls section of this User's Manual for a full description of these OSD controls.
NOTE:
When you plan to use a HDMI signal, please select HDMI in HDMI/DVI SELECT in Advanced Menu Tag9 or on
NO SIGNAL OSD warning (see page 18).
NOTE:
If you have any problems, please refer to the Troubleshooting section of this User's Manual.
Raise and Lower the Monitor Screen
The monitor may be raised or lowered in Landscape mode.
To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1).
NOTE:
Handle with care when raising or lowering the monitor screen.
Figure D.1
Power Button
Figure E.1
Figure RL.1
English-9
Advertisement
Table of Contents
