Table of Contents
Advertisement
3. Recording Modes
Functions that work automatically
∫
•
The following functions are performed automatically to allow the camera to make the optimal
settings.
–
Scene Detection
–
Backlight Compensation
–
[Face/Eye Detection]
–
Auto White Balance
–
Intelligent ISO sensitivity control
–
[Red-Eye Removal]
–
[i.Resolution]
–
[i.Dynamic]
–
[Long Shtr NR]
–
[Shading Comp.]
–
[Quick AF]
–
[AF Assist Lamp]
Auto Focus, Face/Eye Detection , and Face Recognition
∫
The Auto Focus Mode is automatically set to [š]. If you touch the subject, the AF tracking
function will work. The AF tracking function will also work if you press 2 and then press
the shutter button halfway.
(About tracking AF, refer to
•
When [
], [
], or [
while the exposure will be optimised for the face.
In Intelligent Auto Plus Mode or Intelligent Auto Mode, you cannot change
the eye in focus. ([Face/Eye Detection])
•
During AF Tracking, Scene Detection does not work until the subject is
locked.
•
When [Face Recog.] is set to [ON], and the face similar to the registered face is detected, [R] is
displayed in the top right of [
About the flash
∫
Flash mode is set to [Œ] when the flash is closed, and [
When the flash is open, the camera automatically sets [
Reduction), [
] or [
•
Open the flash when the flash is to be used.
•
When [
] or [
] is set, Red-Eye Removal is enabled.
•
Shutter speed will be slower during [
P140
for details.)
] is set, an eye closer to the camera will be in focus,
], [
] and [
] to match the type of subject and brightness.
] or [
].
] (AUTO) when it is open.
], [
(P198)
].
72
] (AUTO/Red-Eye
Advertisement
Table of Contents
