2. Getting Started/Basic Operations
Taking Pictures Using the Touch Function
Taking pictures using the Touch Shutter function
Applicable modes:
Just by touching the subject you want as your point of focus, the camera will focus on the
subject and take the picture automatically.
1
Touch [ ].
2
Touch [
×
•
Icon will change to [
Touch Shutter function becomes possible.
3
Touch the subject you wish to focus on, and
then take a picture.
•
The picture is taken when the focus is achieved.
To cancel the Touch Shutter function
∫
Touch [
].
•
If shooting with the touch shutter fails, the AF area turns red and disappears. In that case, try
again.
•
Measurement of brightness is performed on the spot touched when the [Metering Mode]
is set to [
].
At the edge of the screen, the metering may be affected by the brightness around the touched
location.
].
], and taking a picture with the
50
AE
AE
(P160)