Setting The Light Sensitivity - Panasonic LUMIX DMC-GF7KGN Operating Instructions Manual

5. Focus and Brightness (Exposure) Settings

Setting the Light Sensitivity

Applicable modes:
This allows the sensitivity to light (ISO sensitivity) to be set.
Setting to a higher figure enables pictures to be taken even in dark places without the
resulting pictures coming out dark.
1
Select the menu.
>
MENU
2
Select the ISO sensitivity by rotating the
control dial.
3
Press [MENU/SET] to set.
•
Exit the menu after it is set.
AUTO
(Intelligent)
100 ¢2 /200/400/800/1600/3200/
6400/12800/25600
¢1 When the [ISO Limit Set]
automatically within the value set in [ISO Limit Set].
¢2 Only available when [Extended ISO] is set.
(P53)
[Rec] > [Sensitivity]
The ISO sensitivity is automatically adjusted according to the
brightness.
•
Maximum [ISO3200] (With the flash on [ISO1600])
The camera detects movement of the subject and then
automatically sets the optimum ISO sensitivity and shutter
speed to suit the movement of the subject and brightness of
the scene to minimise the jitter of the subject.
•
Maximum [ISO3200] (With the flash on [ISO1600])
•
The shutter speed is not fixed when the shutter button is
pressed halfway. It is continuously changing to match the
movement of the subject until the shutter button is pressed
fully.
The ISO sensitivity is fixed to various settings.
•
When the [ISO Increments] in [Rec] menu
[1/3 EV], items of ISO sensitivity that can be set will
increase.
(P158) of [Rec] menu is set to anything except [OFF], it is set
157
AUTO AUTO
2 2
ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO
ISO 00 00
AUTO AUTO
¢1
¢1
(P159) is set to
40 40