Table of Contents
Advertisement
11. Using the Wi-Fi function
Sending an image each time a recording is made ([Send Images While
Recording])
1
Select the menu.
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images While Recording] > [Smartphone]
2
Select [Via Network] or [Direct], and connect.
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and set.
3 Start "Image App".
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1 Start "Image App".
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit.
•
The connection confirmation screen is displayed on the camera. Select [Yes].
(Only when connecting for the first time)
3 Start "Image App".
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
5
Take pictures.
•
The pictures are sent automatically after taking them.
•
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
(You can also terminate the connection by performing the following operations:
>
MENU
(P53)
(P253)
(P253)
(P253)
>
>
[Setup]
[Wi-Fi]
(P287)
(P295)
(P250)
>
[Wi-Fi Function]
[Yes])
265
Advertisement
Table of Contents
