Connecting External Devices; Connecting Devices To The Notebook; Disconnecting Devices From The Notebook - Fujitsu CELSIUS H270 Operating Manual

Connecting external devices

Connecting external devices
Externaldevices,connecting Devices: Peripherals,see Devices
Under all circumstances, please observe the safety notes provided in
the "Important notes", Page 3
Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Do not pull on the cable when disconnecting a cable. Always take hold of the actual plug.
Follow the steps below in order, when connecting or disconnecting
devices to your notebook:

Connecting devices to the notebook

Devices:
1. Turn off all power and equipment switches.
2. Remove power plugs from the mains outlets for all devices.
3. Connect all the cables to the notebook and the external devices.
4. Plug all data communication cables into the appropriate ports for the data networks.
5. Plug all power cables into the mains outlets.
Please note that connected external devices can discharge the battery of the
notebook if no mains adapter is connected to the port replicator.

Disconnecting devices from the notebook

Devices:
1. Turn off all power and equipment switches.
2. Remove power plugs from the mains outlets for all devices.
3. Unplug all data communication cables from the ports for the data networks.
4. Disconnect all the cables from the notebook and the external devices.
Information about the connections on your notebook can be found
in the corresponding EasyGuide.
46
chapter.
A26391-K200-Z226-1-7619, edition 2