Table of Contents
Advertisement
Setup
Registering other devices
to the hub
This procedure is not required for devices
that were included as part of a bundle.
Before you can use devices such as cameras,
sensors, and smart plugs, they must be
registered to the hub.
If you purchased devices separately (i.e., not
as part of a bundle), you must register each
device to the hub.
You can register each device by using the
registration buttons or the [Home Network]
app.
Using registration buttons
1
Hub:
Press and hold the registration button
until the LED indicator blinks in green.
R Press and hold the appropriate
registration button (page 11) according
to the device you want to register.
M
HANDSET/LOCATORN: For
handsets
M
CAMERAN: For cameras
M
OTHER DEVICEN: For other
devices
2
Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the device's registration
button until the device's LED indicator
blinks in green.
R When registration is complete, the hub
sounds one long beep.
Note:
R If registration fails, the hub sounds several
short beeps.
R To register a mobile device, use the
procedure described on page 15.
16
Using the app
1
Start the [Home Network] app.
2
From the [Home Network] app home
screen, tap [Settings].
3
Tap [Device Registration].
4
Tap [Registration].
5
Select the type of device that you want to
register.
6
Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the registration button on
the device you want to register until the
device's LED indicator blinks in green.
R When registration is complete, the hub
sounds one long beep.
Note:
R If registration fails, the hub sounds several
short beeps.
Advertisement
Table of Contents
