Table of Contents
Advertisement
3.3.6 Super IO Configuration
COM1 Configuration
Use this to set parameters of COM1. Select COM1 port type: [RS232],
[RS422] or [RS485].
COM2 Configuration
Use this to set parameters of COM2. Select COM2 port type: [RS232],
[RS422] or [RS485].
COM3 Configuration
Use this to set parameters of COM3.
COM4 Configuration
Use this to set parameters of COM4.
WDT Timeout Reset
This allows users to enable/disable the Watch Dog Timer timeout to reset
system. The default value is [Disabled].
32
Advertisement
Table of Contents
