Troubleshooting - LG ARX5500 Owner's Manual

5

Troubleshooting

34 Troubleshooting
Troubleshooting
PROBLEM
No Power
No sound
No lighting
Radio stations cannot
be tuned in properly.
5
The remote control
does not work
properly.
CAUSE & CORRECTION
y The power cord is unpluged.
Plug in the power cord.
y Check the condition by operating other electronic devices.
y The speaker wires are disconnected. Check the speaker connections.
y The volume is set to minimum. Adjust the volume level.
y Incorrect input source is selected.
Check the input source and select the correct input source.
y The mute function is activated.
Press @MUTE or adjust the volume level to cancel the mute function.
y The Dimmer or the Sleep function is activated.
Press DIMMER or SLEEP to cancel the function.
y The antenna is positioned poorly. Adjust its position.
y The signal strength of the radio station is too weak.
Tune to the station manually.
y No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 26 for details.
y The remote control is too far from the unit.
Operate the remote control within about 23 ft (7m).
y There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y The batteries in the remote control are exhausted.
Replace the batteries with new one.