Event Log - ETC Penko SGM700 Series Manual

MANUAL SGM700

5 Event Log

Event Log automatically records various system events like Software Updates and
Calibrations. Event Logs can be viewed via Pi Mach II Manage:
How you can connect your SGM700 to PI Mach II Manage is explained in chapter
3 of this manual. Enter the Event number at "Entry Number" and confirm with Enter
or the Apply button. The event is shown.
In this example you can see that Entry 11 is a Calibration change on February 1st 2014
at 12:19:52 and it gest the Unique Identification Code (UID) 1583349770.
Events can only be printed with the SGM750 Serial. Pressing the button will erase the
complete Event log memory.
95