Display Indication At Startup - ETC Penko SGM700 Series Manual

MANUAL SGM700
2.5

Display indication at startup

Turn the indicator on by connecting it to the power supply. A
series of display will appear:
Display test. All LED will turn on to confirm that
the device display is functioning correctly.
Model Name. This shows the model name of the
device (in this case a SGM720 Ethernet).
Software version. This is the software version installed in
the device.
Software update counter. The number of times that
the software of the device is updated.
TAC code. The Traceable Access Code is the
counter that keeps track how many times indicator
setting are changed.
CAL Code. The Calibration code is the counter
that keeps track how many times the calibration
setting is changed.
Delay time. The delay time is warming up. This is
needed for certification. The counter will count
back from 180 to 0.
17