Using The Open Assist Button; Important Precautions - NTT docomo SMART Series Instruction Manual

Attaching/Removing Feeling piece
By attaching accessory Feeling piece, you can change the outer
appearance readily by the various scene or add differences in
vision when the light turns on or blinks.
✜
Attaching
Align the groove on the FOMA terminal with the projection of Feeling
piece and hold in the direction a, then align the other sides and push
in the direction b until it clicks.
✜
Removing
Hold the end of Feeling piece up in the direction of the arrow mark and
remove it.
✜

Important precautions

･
It is recommended to store the Feeling piece in the attached
dedicated case to prevent from damage or loss
･
Do not make a major impact on the Feeling piece or give excessive
force when attaching/removing. It may cause deform or damage the
Feeling piece.
6

Using the Open assist button

You can open the FOMA terminal easily just by pressing the
dedicated button.
･ Even without using the button, the FOMA terminal can be
opened easily with light force.
Point
･
It is recommended to hold the FOMA terminal in your hand for the
operation. Be careful not to hit your face, people or objects when opening
the FOMA terminal or not to drop the FOMA terminal by the rebound
when opening.
･
Depending on the orientation, the FOMA terminal may not opened
completely even by pressing the button.
･
Close the FOMA terminal with your hand. If the FOMA terminal is not
closed completely, once open it completely and then close it.