Table of Contents
Advertisement
[Network setting]
1)
Press as to select [Network].
2)
Press the <ENTER> button.
f The [Network] screen is displayed.
3)
Press the <ENTER> button.
f The [Network setting] screen is displayed.
4)
Press as to select an item, and change the setting according to the instructions.
[DHCP]
[IP address]
[Subnet]
[Gateway]
[DNS]
5)
Press as to select [Set], and press the <ENTER> button.
f The following settings are set before the projector leaves the factory.
Note
f Before using the DHCP server, make sure the DHCP server is already functioning.
f Consult your network administrator regarding the IP address, Subnet and Gateway.
[Network information]
1)
Press as to select [Network].
2)
Press the <ENTER> button.
f The [Network] screen is displayed and then confirm the following items.
[MAC address]
[IP address]
[SSID] *
1
[Wireless IP] *
1
*1 It will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is inserted.
[Remote control]
This switching function prevents remote control interference when operating several projectors or video equipment at the same
time.
1)
Press as to select [Remote control].
2)
Press the <ENTER> button.
f The [Remote control] screen is displayed.
3)
Press as to select one item.
f This projector provides seven different remote control codes: [ALL], [Code 1]~[Code 6].
[ALL]
[Code 1] - [Code 6] Select when specifying an ID number to control individual projector.
Chapter 4 - Settings - [Expand] menu
[On]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[Off]:
If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP address], [Subnet] and [Gateway].
Enter the IP address if DHCP server is not used.
Enter the subnet mask if DHCP server is not used.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
[DHCP]
[IP address]
[Subnet]
[Gateway]
[DNS]
Displays the MAC address of this projector.
Displays the current IP address of this projector.
Displays the SSID character string of the projector while the Wireless LAN is connected.
Displays the IP address of the wireless module which is inserted into the projector while the
wireless LAN is connected.
Select when controlling projectors without specifying an ID number.
Off
192.168.1.100
255.255.255.0
192.168.1.1
192.168.1.1
ENGLISH - 69
Advertisement
Table of Contents
