Download Print this page
Kohler MING K-77127T Installation Instructions

Kohler MING K-77127T Installation Instructions

896mm cabinet

Advertisement

Quick Links

BEFORE YOU BEGIN
BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information-
please leave instructions for the
consumer.
·
Ming bathroom cabinet adopts E1 grade natural black
walnut wood-based panel of high quality. With further
processing, its harmful emission is less than 1.5mg/L.
·
Turn off the water supply.
·
The pluming installation must comply with Water Supply
Regulations/Bye-laws, Building Regulations or any
particular regulations and practices, specified by the local
water company or water undertakers. The installation
should be carried out by a plumber.
·
Before installation carefully inspect the new fixture for any
signs of damage.
·
This product complies with GB 24977-2010.
ORDERING INFORMATION
This installation covers the following products in the MING
range:
MING 896mm Cabinet .......................................K-77127T
SAFETY WARNINGS
Kohler products are precision-engineered and should give
continued superior and safe performance, provided:
1. They are installed, commissioned, operated and
maintained in accordance with the recommendations given
in this Manual.
2. Periodic attention is given, as necessary, to maintain the
product in good functional order. Recommended
guidelines are given in the
Carefully inspect the new fixture for any signs of damage.
When installing Kohler Products, manufacturers guidelines for
power tool safety should be followed.
KOHLER CHINA INVESTMENT CO., LTD
1290727-T01-A
MAINTENANCE
section.
ZHABEI DISTRICT, SHANGHAI, PRC
(
)
·
·
·
·
E1
·
·
·
·
GB 24977-2010
1.
2.
NO.158, JIANG CHANG SAN ROAD,
POST CODE: 200436
158
©
Copyright Kohler China Investment Co., Ltd. 2016
-1-
©
MING
INSTALLATION INSTRUCTIONS
896mm CABINET
896mm
K-77127T
1.5mg/L
200436
-
2016

Advertisement

loading

Summary of Contents for Kohler MING K-77127T

  • Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
  • Page 2: Installation

    ROUGHING-IN Reference Value UNIT : mm Fig.1 Kohler reserves the right to change marked dimensions without prior notice. INSTALLATION A. Install Washbasin Cabinet Install the services. Hot (H) and Cold (C) inlets must be connected to the correct inlet pipes.
  • Page 3 1. Put the cabinet upright and place it at a desired position in the bathroom. Adjust the adjustable feet to make the cabinet level, as shown in Fig.4. Horizontal Go Up Go Down Fig.3 2. Pre-drill wall anchors · · Adjust cabinet level and use pencil to mark the hole of the back bar on the wall.
  • Page 4 C. Install the Synthetic Top/Counter Top Note: Please refer to the installation instructions of synthetic top/counter top for its installation. To protect the cabinet from dampness, please apply silicone sealant where the synthetic top /counter top and the cabinet connect. Connect Drainage 1.
  • Page 5: User Maintenance

    6. Please do not sit, lean or step on the basin cabinet. 7. If any fixtures caused by abnormal reasons, Kohler China can supply paid replacement for service parts caused by abnormal reasons as shown in the Service Parts Page in the limited duration of warranty.