Download Print this page
Kohler K-72441T Installation Instructions Manual
Kohler K-72441T Installation Instructions Manual

Kohler K-72441T Installation Instructions Manual

Mirrored cabinet

Advertisement

Quick Links

BEFORE YOU BEGIN
BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information-
consumer.
·
Before installation carefully inspect the new fixture for any
signs of damage.
WARNING: Risk of injury or product damage.
careful when opening the door to avoid pinching
fingers.
WARNING:
Don't use acidic or alkalic cleaners or
alcohol to clean the surface. Use a dampened cloth to
clean.
PARTS
Parts supplied with your cabinet. (For cabinet body and door
replacement, call customer service with model number.) Be
sure to check the cardboard supports in the carton, glass
parts are packed in them.
Grasp Position
1208162-T01-A
please leave instructions for the
·
·
·
·
Be
Installation height
1.2m from floor
13-1
-1-
INSTALLATION INSTRUCTIONS
MIRRORED CABINET
Tips:
1. When opening or closing the door
leftwards or rightwards, please grasp the
door at the lower right corner or lower left
corner to avoid pinching fingers.
2. Recommended installation height: 1.2m
from the floor.
1.
2.
1.2
528437
Copyright Kohler China Ltd., 2013
BE BOX
K-72441T
-
1.2
, 2013

Advertisement

loading
Need help?

Need help?

Do you have a question about the K-72441T and is the answer not in the manual?

Questions and answers

Summary of Contents for Kohler K-72441T

  • Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
  • Page 2: Accessories List

    L=137mm ST3.5 35 Glass Shelve with Hole Glass Shelve with Hole Hinder 1124095 1169355 1170223 L-354mm L-354mm Snap-in Pins Base Cup Shelf ROUGHING-IN Reference Value UNIT : mm Kohler reserves the right to change marked dimensions without prior notice. 1208162-T01-A...
  • Page 3: Cabinet Installation

    INSTALLATION Cabinet Installation Drill holes Drill holes 4- 6mm 4- 6mm 4- 6mm 4- 6mm Fix the mounting bar to the wall, level the mounting bar. Screws ST3.5 35 and Wall Anchors ST3.5 35 Distance from highest point of the countertop (such as faucet handle) 40 STEP ) 40 1.
  • Page 4 2. Install the mounting bar STEP 3. Fixing the cabinet a. Put the cabinet on the mounting bar. b. Slide top clips to align with the holes drilled in the previous step. Fix with screws. Top Clip Cabinet Mounting Bar STEP 1208162-T01-A...
  • Page 5 Installation of Slide Door Assy. STEP a. Loosen the screws of the top and bottom wheels with screw driver. b. Lift each wheel and put into the rail slot. Note: Make sure each wheel is properly put into the rail slot.
  • Page 6 a. Tighten the screws of the top and bottom wheels with screw driver. The wheels must be pressed tight onto the rail slot. b. Slide the door leftwards and rightwards. When the door is firmly fixed onto the cabinet and slides smoothly, please tighten the nut of the screw.
  • Page 7 4. Put the top cover into the slot on top of the cabinet (Note: If installed with lighting of Kohler brand, the power of the lighting can be installed as shown in the picture and then fix the top cover. Lighting is not supplied with the cabinet.) 5.