Table of Contents
Advertisement
Other Problems
The date/time is incorrect.
Correct the date and time via the operating system or SCU program.
After you have performed everything as described above and still
have the incorrect date and time every time you turn on the
computer, the RTC (Real-Time Clock) battery is at the end of its life.
Call an authorized dealer to replace the RTC battery.
Resetting the Computer
You may have to reset (reboot) your computer on some occasions when
an error occurs and the program you are using hangs up.
If the system operation seems to hang up, first wait. It is possible that the
system is processing data. Periodically check the hard disk drive in-use
indicator, if it flashes irregularly, the program may be accessing data and
preventing you from using the keyboard. If you are sure the operation has
stopped and you cannot use the "restart" function of the operating system,
reset the computer.
Reset the computer by any one of these methods:
Ctrl
Press
+
If the above action does not work, turn off the system. Wait for at
least five seconds and turn it on again.
If the above does not work, insert a small rod, such as a straightened
paper clip, into the keyboard BIOS reset switch on the left side of the
computer and press firmly.
CAUTION: Resetting will cause any unsaved data to be lost.
8-16
Alt
Del
+
.
Troubleshooting
Advertisement
Table of Contents
