The date/time is incorrect.
l Correct the date and time via the operating system or SCU program.
l After you have performed everything as described above and still
have the incorrect date and time every time you turn on the computer,
the RTC (real-time Clock) battery is at the end of its life. Call an
authorized dealer to replace the RTC battery.
Resetting the Computer
You may have to reset (reboot) your computer on some occasions when
an error occurs and the program you are using hangs up.
If the system operation seems to hang up, first wait. It is possible that
the system is processing data. Periodically check the hard disk drive in-
use LED indicator, if it flashes irregularly, the program may be
accessing data and preventing you from using the keyboard. If you are
sure the operation has stopped and you cannot use the "restart" function
of the operating system, reset the computer.
Reset the computer by any one of these method:
l If the above action does not work, turn off the system. Wait for at
least five seconds and turn it on again.
CAUTION: Resetting will cause any unsaved data to be lost.