Battery Low Signals And Actions - Motorola Mobile Laptop 850 Owner's Manual

Battery Low Signals and Actions

Battery Low occurs when the battery has approximately 10% (Windows
default setting) of its charge remaining. The computer in the Battery
Indicator LED blink to alert you to take actions.
NOTE: You can set up your threshold and signals of Battery Low under Windows.
Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the computer. If you are using the
audio subsystem, PC card, hard or CD-ROM or floppy disk drives, the
battery might run out of charge very quickly.
Always respond to Battery Low by placing your computer on
suspend –to-disk (if enabled under O/S program ) and turn off or, system
will continue on until battery is dead.
CAUTION:
If you are using a flash PC card, do not access the card during battery low periods.
This is because the access may take longer than the time it takes the battery to run
out of charge, thus making your access to the card unsuccessful.
If you fail to save your data when the battery completely runs out of charge, then
you lose your data.
Managing Power 3-7