Specification - LG RM-17LZ50 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to ML-041B chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature: 25°C ± 2°C
(2) Humidity: 65% ± 10%
(3) Power: Standard input voltage (AC 100-240V, 50/60Hz)
(4) Measurement must be performed after heat-run more than
30min.
(5) Adjusting standard for this chassis is followed a special
standard.
3.General Specification
No. Item
1 Maker
Type
ActiveDisplay Area
Pixel Pitch [mm]
Electrical Interface
Color Depth
Size [mm]
Surface Treatment
Operating Mode
Back light Unit
R/T Typ.
2 Maker
Type
ActiveDisplay Area
Pixel Pitch [mm]
Electrical Interface
Color Depth
Size [mm]
Surface Treatment
Operating Mode
Back light Unit
R/T Typ.

SPECIFICATION

Specification
LPL
TFT Color LCD Module
17.0 inches(380.16mm) diagonal(Aspect 4:3)
0.291mm(H)x0.291mm(V)xRGB
LVDS
6BIT WITH FRC, 16,777,216 colors
400(H)x258.7(V)x22(D)
Anti Glare Hard Coating(3H)
Normally Black
4 CCFL(4 lamps)
R.T.:12ms + F.T.:23ms
AUO
TFT Color LCD Module
17.1 inches(434.38mm) diagonal
0. 2895mm(H)x0.2895mm(V)xRGB
LVDS
RGB 6-BIT 16,2MColors
404(H)x248.5(V)x17.2(D)
Hard Coating, AR
Glare (3H)
Normally Black
4 CCFL(4 lamps)
R.T:15/25ms F.T: 10/15ms
- 6 -
Remark
LPL
AUO