13 Advanced
settings
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
Auto registration
1
Place the unregistered handset on the
base station.
The handset detects the base station
»
and start to register automatically.
Registration is completed in less than 2
»
minutes. The base station automatically
assigns a handset number to the
handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Select [MENU] > [ADVANCED SET]
> [REGISTER], then press [SELECT] to
confirm.
2
Press and hold
5 seconds until you hear a confirmation
beep.
3
Enter the system PIN. Press [CLEAR] to
make corrections.
on the base station for
4
Press [OK] to confirm the PIN.
Registration is completed in less than 2
»
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found
within a certain period, your handset displays
a notification message. Repeat the above
procedure if registration fails.
Note
•
The preset PIN is 0000. No change can be
made on it.
Unregister the handsets
If two handsets share the same base station, you
can unregister a handset with another handset.
1
Select [MENU] > [ADVANCED SET] >
[UNREGISTER], then press [SELECT] to
confirm.
2
Enter the system PIN. Press [CLEAR] to
make corrections.
3
Select the handset number to be
unregistered.
4
Press [SELECT] to confirm.
The handset is unregistered.
»
Tip
•
The handset number displays beside the
handset name in standby mode.
EN
33