Advanced Settings; Enhance The Audio Quality; Register The Handsets; Unregister The Handsets - Philips SE1701B/51 User Manual

13 Advanced
settings

Enhance the audio quality

XHD (Extreme High Definition) sound mode is
an exclusive feature which transmits high fidelity
signals to the handset. It makes the phone
conversations sound like real-life conversations.
When you are in standby mode,
1
Press MENU.
2
Select [ADVANCED SET] > [XHD
SOUND], then press OK to confirm.
3
Select [ON]/[OFF], then press OK to
confirm.
The setting is saved.
»
When you are in a call,
1
Press OK to enter the options menu.
2
Change the XHD setting.
3
Press OK to confirm.
» The setting is saved.

Register the handsets

You can register additional handsets to the base
station. The base station can register up to 4
handsets.
Auto registration
1
Place the unregistered handset on the
base station.
» The handset detects the base station
and start to register automatically.
Registration is completed in less than 2
»
minutes. The base station automatically
assigns a handset number to the
handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Press MENU on the handset.
2
Select [ADVANCED SET] >
[REGISTER], then press OK to confirm.
3
Press and hold
for 5 seconds (for the model with
telephone answering machine, you hear a
confirmation beep).
4
Enter the system PIN. Press BACK to
make corrections.
5
Press OK to confirm the PIN.
» Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found
within a certain period, your handset displays
a notification message. Repeat the above
procedure if registration fails.
Note
•
The preset PIN is 0000. No change can be
made on it.

Unregister the handsets

1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Press MENU.
3
Select [ADVANCED SET] >
[UNREGISTER], then press OK to
confirm.
4
Enter the system PIN. (The preset PIN
is 0000). Press BACK to remove the
number.
on the base station
EN
29