In multi-handset packs, there are additional handsets, chargers and power adapters. Base station (SE576) Base station (SE571) In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket.
All manuals and user guides at all-guides.com Connect Connect the base station Connect each end of the power adapter to: Telephone Power Power • the DC input jack at the bottom of the base station; socket socket socket • the power socket on the wall. Power Connect each end of the power adapter to (for multi-handset adapter...
All manuals and user guides at all-guides.com Install Install the handset The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear the docking sound.
All manuals and user guides at all-guides.com Check the battery level When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars keep scrolling until charging completes. The empty battery icon flashes and you hear an alert tone.
All manuals and user guides at all-guides.com Enjoy Call Record an announcement (for SE576 only) • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. [MENU] > [ANSWER MACHINE] > Select •...
Page 7
All manuals and user guides at all-guides.com Listen to messages recorded on the answering machine (for SE576 only) Switch on/off the answering machine: Press Start/Stop listening to the recorded messages: Press Adjust the volume: Press / –. Skip backward: When you listen to the messages, press to listen to the ¡...