Configuring Parental Settings; Electronic Programme Guide (Epg); Software Upgrade - JVC LT-32V250 Instructions Manual

Configuring Parental Settings
To prohibit viewing of certain programmes, channels and
menus can be locked by using the parental control system.
To display the Parental Settings menu options
(accessible from Settings menu under Parental), the
PIN number should be entered. The factory default
PIN number is 0000*. After coding the correct PIN
number, the Parental Settings menu will be displayed.
Menu Lock: Menu lock setting enables or disables
the menu access.
Maturity Lock: When the Maturity Lock option is set,
it gets the maturity information from the broadcast
and if this maturity level is disabled, disables access
to the broadcast.
Child Lock: When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work.
Set PIN: Defines a new PIN number.
*Default PIN code can change depending on the
selected country.
If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes: 4725,
0000 or 1234.

Electronic Programme Guide (EPG)

Some, but not all channels send information about the
current and next programmes. Press the "
to view the EPG menu.
Red button (Prev Day): Displays the programmes
of the previous day.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views filtering options.
"SUBTITLE: Press
"
Genre menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.
"i"(Info): Displays or hides detailed information on
the programme selected.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK: Displays Event options (Select Channel, Record,
and if the programme is later, Set Timer on Event).
(Search): Displays "Guide Search" menu.
(Now) : Shows the current programme.
(Rec./Stop): The TV will start to record the
selected programme. You can press again to stop
the recording.
" button
" button to view Select
"
More event info (you first have to press "i" button
P+P- :
for this setting to appear on screen).
IMPORTANT: Connect a USB disk to your TV while the TV
is switched off. You should then switch on the TV to enable
the recording feature.
Note: Switching to a different broadcast or source is not
available during a recording.
Programme Options
In EPG menu, press the OK button to enter the Event
Options menu.
Select Channel
In EPG menu, using this option, you can switch to the
selected channel.
Record / Delete Record Timer
After you have selected a programme in the EPG
menu, press the OK button. Select the Record
option and press the OK button. After this operation,
a recording will be scheduled for the selected
programme.
To cancel an already set recording, highlight that
programme and press the OK button and select
the option Delete Rec. Timer. The recording will be
cancelled.
Set Timer / Delete Timer
After you have selected a programme in the EPG
menu, press the OK button. Select the Set Timer on
Event option and press the OK button. You can set
a timer for future programmes. To cancel an already
set timer, highlight that programme and press the OK
button. Then select "Delete Timer" option. The timer
will be cancelled.
Note: It is not possible to record two channels at the same
time.

Software Upgrade

Your TV is capable of automatically finding and
updating new software upgrades via the Aerial/Cable
signal.
Software upgrade search via user interface
Simply navigate on your main menu. Choose Settings
and select Other Settings menu. In Other Settings
menu navigate on to the Software Upgrade item and
press OK button to check for a new software upgrade.
3 AM search and upgrade mode
While the TV is connected to an aerial signal, if
Automatic scanning in the Upgrade Options menu
is enabled, the TV wakes up at 03:00 and searches
broadcast channels for new software upgrades. If
new software is found and downloaded successfully,
the next time the TV powers up , it will have the new
software version.
Note: If the TV fails to turn on after the upgrade unplug the
TV for 2 minutes and plug in again.
English - 18 -