Approved Pipe - Heat & Glo JADE32IN Installation Manual

Table of Contents

C. Approved Pipe

Approved Pipe - Rigid

This appliance is approved for use with Hearth & Home

Technologies SLP venting systems. Refer to Section

12.A for vent component information and dimensions.

DO NOT mix pipe, fittings or joining methods from differ-

ent manufacturers.

The pipe is tested to be run inside an enclosed wall.

There is no requirement for inspection openings at each

joint within the wall.

WARNING! Risk of Fire or Asphyxiation. This appli-

ance requires a separate vent. DO NOT vent to a pipe

serving a separate solid fuel burning appliance.

Approved Pipe - Flex

This appliance is approved for use with Hearth & Home

Technologies SLP-FLEX (6-5/8 inch) and SLP-FLEX7 (7

inch) venting systems.

DO NOT mix pipe, fittings or joining methods from differ-

ent manufacturers. SLP-FLEX and SLP-FLEX7

venting cannot be interchanged.

SLP-FLEX (6-5/8 Inch): Venting may be used in any

venting configuration shown in the venting tables pro-

vided that the horizontal vent length is reduced by 25%.

SLP-FLEX7 (7 Inch-Canada Only): Venting requires

adapter collars to transition from the 6-5/8 IN. appliance

starting collar and to the 6-5/8 IN. termination cap. Refer

to installation instructions included with the SLP-FLEX7

collar adapter (SLP-FLEX7-A). SLP-FLEX7 Series vent-

ing is approved for use in Canada only.