Energy Management; At The End Of The Programme - Miele G4930SCU Operating Instructions Manual

Table of Contents

Advertisement

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Programme op-
tions, Optimise standby").
 Press the  button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.

At the end of the programme

The programme has ended when .
shows in the display.
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
 The dishwasher can now be opened
and unloaded.
To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is advisable
to leave the door closed until you are
ready to unload the crockery. Altern-
atively you can open the door fully
until the crockery is cool enough to
unload. Do not leave the door only
partially open.
Operation
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 4930 sci

Table of Contents