Sceptre X322BV-SRR Manual page 51

Problems
PICTURE HAS
PIXELS THAT ARE
ALWAYS
DISPLAYING THE
SAME COLOR
I CANNOT CHANGE
THE TIME MANUALLY
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN
TIPS FOR
LETTERBOX
CONTENT USERS
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS
DISPLAY TURNS OFF
AUTOMATICALLY
AFTER 10 MINUTES
My cell phone doesn't
work when I connect
the MHL cable to
HDMI.
Under MHL the
DISPLAY's remote
won't control the cell
phone screen fully.
Your display is manufactured using an extremely high level of
precision technology, however, sometimes some pixels of your
display may not show up. Pixels defects within industry
specifications are inherent to this type of product and do not
constitute a defective product.
Your display syncs time automatically according to your local
televised channel. This function only works while the
(optional) TV tuner is connected to an ANTENNA.
You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed
captioning and the box will disappear. Refer to page 34 for
more information.
Different channels and inputs will sometimes have this effect
because the channel signal's own volume is already loud.
There is no way remove this completely. The display has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
When your display's resolution is higher than the digital
channel's broadcast resolution, the signal is up-converted to
match your display's resolution. Up-converting can cause this
type of effect.
Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The display has the
capability of expanding this content so the entire screen is
filled at the expense of the image proportion. To use this
function press the aspect button on the remote control and
cycle among the available options.
The buttons are represented by the ▲▼◄► buttons located
on the remote control. ▲▼ changes the channels and ◄►
changes the volume.
The display features a power saving mode which will
automatically turn off the display, if there's no signal provided
for more than 10 minutes.
Check if you connected to HDMI 1 or another HDMI since
ONLY HDMI 1 works with MHL. If it still doesn't work make
sure you have the correct MHL cable (some have more pins
than others). Ultimately, please consult your cell phone
manufacturer for compatibility issues.
For total control you will need to use the cell phone's touch
screen. The display's remote have limited functions and its
controls are dependent on the program you are using.
- 51 -
www.SCEPTRE.com
SCEPTRE X322BV-SRR User Manual
Solutions