Identifying Front And Rear Panel; Front View; Rear View Mounting Pattern - Sceptre X322BV-SRR Manual

Identifying Front and Rear Panel

Front View

INDICATOR LIGHT – The light is red when power is plugged in but the display is not turned on. The
light turns blue when the display is turned on. The display might take 10 – 12 seconds to power
on. This is considered to be normal.
REMOTE SENSOR – The remote sensor receives all the commands from the remote control.

Rear View Mounting Pattern

Mounting Specification: 100mm x 100mm using 4 screws sized at M4 (not included). Length of
screw should not exceed 6mm. Please Note: The 6mm length of screw refers to how deep the
screw can go inside the mounting holes. When you're buying screws, you should add the original
6mm to the thickness of your mounting plate in order to get the total screw length.
- 11 -
www.SCEPTRE.com
SCEPTRE X322BV-SRR User Manual