Rear View Connections - Sceptre X322BV-SRR Manual

Rear View Connections

USB – USB connects to USB flash drives for playing music and picture. The
1.
USB port is also used for updating the display's firmware.
YPbPr / AV – This connection port is for DVD players or satellite / cable set-
2.
top boxes that use component or composite cables. For YPbPr connect
green, blue, and red for video, and then connect white for left channel audio,
and red for right channel audio. For AV connect the yellow plug to the green
port, connect white for left channel audio, and red for right channel audio.
3. SPDIF - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (Coaxial SPDIF OUT)
connector sends out either bit-stream or PCM digital sound signal to a home
theater receiver with digital optical input.
HEADPHONE – This connection is for headphones to be attached to the
4.
display.
TV(optional) – This connection is for analog cable without the cable box or
5.
over-theairwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org.
This tuner DOES NOT support QAM. For digital cable, you WILL need a
cable box.
6. Audio In - This connection port is for people who want to provide audio to the
display when using a PC or a DVI video device. The sources use 3.5mm
mini-jack audio cable.
- 13 -
www.SCEPTRE.com
SCEPTRE X322BV-SRR User Manual