Page 1
Warranty Card x 1 Display Remote Control (AAA Batteries included) x 1 User Guide x 1 (Complete manual available online at sceptre.com) ATTACHING & REMOVING THE BASE To install the feet of the TV, lay the TV flat on a table. Afterwards obtain the two display stands that are labeled L for left and R for right.
The following picture offers a suggestion for connecting most of your audio video equipment. TV Tuner is optional. It may or may not be equipped in your product. Please check with the authorized seller, authorized distributor or Sceptre Customer Service for further information. UMC Series P2...
Ready to Watch Some TV? (Optional) Make sure your power cable is connected and the standby red light in the front of the HDTV is lit Check all your connection cables off the side or the back of your HDTV and also your AV devices.
If You’ve Connected Cable or Satellite Set-top Boxes to the HDTV… Press the button on the side of the HD Display or the SOURCE button on the remote control and you will see the picture above. Use ▲▼ buttons to select the source you want to switch to and press the ENTER button in the middle of the ▲▼...
SCEPTRE Remote Control Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover.
HDMI3. Buttons encircled by the word SOUND BAR are to be used with a Sceptre’s sound bar only. Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
SCEPTRE is a trademark or registered trademark of Sceptre Group. Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.