Table of Contents
Advertisement
Corded Use
•
Connect the charging adaptor to the product and then to the mains.
•
When the cord is connected to the mains, a charging LED light is
displayed on the hair clipper.
Caution: Extended mains (corded) only use will result in the reduction of
the battery life.
HOW TO USE
Before Starting to Cut
1.
Inspect the hair clipper making sure that it is free from hair and dirt.
2.
Ensure that the hair is thoroughly dry and tangle free.
3.
The blades on your hair clipper should be oiled before every haircut.
Lubricating the Hair Clipper Blades
Simply place a few drops of oil on the teeth of the blades. Use only the light
grade oil supplied or a suitable alternative like sewing machine oil. Only this
type of oil is suitable due to the high oscillation speed of the blades on your
Remington hair clipper. Do not use hair oil, grease or any oil mixed with
kerosene or any solvent as the solvent will evaporate and leave the thick oil,
slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied,
this may cause cutting problems. Blades will wear prematurely and not cut
properly if they are not sufficiently lubricated. There may also be a pulling
sensation on the hair.
Instructions for Hair Cutting
Note: For even cutting, allow the trimmer comb/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the first time,
start with the maximum length trimmer comb, until you know how short
you would like your hair to be.
Note: The comb guide lengths described for use in the steps below are an
example only, if you want a longer or shorter hair cut you will need to adjust
the comb guide lengths to suit your requirements.
6
Advertisement
Table of Contents
