Table of Contents
Advertisement
To Remove Hair From The Ear
1.
Select the nose & ear trimmer.
2.
Turn the trimmer on.
3.
Insert the trimmer's cutting unit gently into the outer ear canal
opening.
4.
Gently rotate the trimmer in a circular motion.
5.
To trim hairs protruding from the surface of the area surrounding the
outer ear canal, guide the trimmer around the edge of the ear.
6.
Avoid inserting the trimmer more than 6mm into your ear canal.
Note: Do not apply excessive pressure as this damages the trimmer and
may cause skin injury.
To Trim Sideburns
1.
Select the detail trimmer.
2.
Turn the trimmer on.
3.
Gently guide the cutting unit to your sideburns holding the unit
horizontally at a 90 degree angle to the sideburns.
4.
Trim the sideburns moving the trimmer slowly and carefully, to ensure
that you do not accidentally cut hairs that you do not intend to trim.
Note: It is not recommended that you use the trimmer to define or trim the
eyebrows.
CLEANING & MAINTENANCE
Both your detail trimmer and nose & ear trimmer are designed to give you
years of comfortable use. To ensure that you get optimal performance from
your trimmers, follow these simple cleaning and lubricating tips:
•
After each use, brush or blow accumulated hair from the cutting units.
Rinsing Your Trimmers
•
The heads of your trimmers are washable and can be rinsed with cool
or warm water. Simply twist the attachment head 1cm anticlockwise
(to the left), remove the head &/or blade (nose & ear trimmer) and
rinse them under the tap - do not use hot water. Do not allow water
into the body of the handpiece.
•
Afterward, shake excess water from the cutter head. Be sure to be
careful when handling the nose trimmer blades as they are sharp.
•
Replace the head in the same position as it was removed, turning it
1cm clockwise (to the right) until it locks into place.
13
Advertisement
Table of Contents
