Disassembling The Camera; Factory Reset - Digital Watchdog MEGApix DWC-MPF5Wi4TW User Manual

Installation -
Disassemble the camera
Before installing your camera, you must read the following cautions.
1. The mounting surface must withstand five times the camera weight.
2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may
cause a short or fire.
3. For the installation process, remove the dome cover from the camera module by loosening the three
(3) screws on the dome. Use the Allen wrench provided with the camera.
Reset Button
4. Install the moisture packet in the base of the
Poron Ring
5. Remove the protective film between the dome
6. Remove the poron ring before placing the dome
make sure to align the cover and bottom case to
match the case outline.
7
camera's lens.
a. Remove the moisture absorber from the
packaging.
b. Cut the card and folder along the dotted
line.
c. Place the moisture absorber around the
camera lens module.
and the camera module.
back on the camera. When attaching the dome
back, align the line on the dome with the one on
the base of the camera.
When placing the cover back on the camera, also
Reset to the Factory Default
Press the reset button for 5 seconds to return the
setup to the factory default.
Warning:
If you press the 'Reset' button, you will lose all
setting data. If needed, please, make a note for
further installation.