INSTRUMENT AND CONTROL FUNCTIONS
Starter (choke) knob "
1
2
(b)
3
4
1. Starter (choke) knob "
Starting a cold engine requires a richer
5
air-fuel mixture, which is supplied by
the starter (choke).
6
Move the knob in direction (a) to turn on
the starter (choke).
7
Move the knob in direction (b) to turn off
the starter (choke).
8
9
EAU13600
"
Seat
To remove the seat
1. Remove the bolts, and then pull
the seat off.
1
(a)
"
1. Bolt
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
EAU13970
1
(×2)
3-8
2
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
NOTE:
Make sure that the seat is properly se-
cured before riding.
1