TYT TC3600 Manual page 12

1. Then you can receive a valid call. LED glows green during receiving.
2. 1) If CTCSS/CDCSS and squelch tail elimination feature are enabled by your dealer,
noise will be removed by the end of a conversation.
2) Beep tone sounds by the end of a conversation if roger tone is enabled by your
dealer;
Please contact your dealer for more details.
Monitor
1. Press MONI key to monitor the current channel.
2. Press MONI key again to exit.
3. Your dealer can set three monitor modes: Selective call monitor, CTCSS monitor
and Carrier monitor.
Selective call monitor: To prohibit selective call squelch;
CTCSS monitor: To prohibit all signaling squelch and open the speaker when carrier is
detected.
Carrier monitor: To prohibit all squelch and open the speaker.
Repeater/Talk Around
When the repeater doesn't work or you are out of the communication range of the
repeater and within the communication range of your group member, you can bypass
the repeater and talk directly to your group member.
Press programmed "Repeater/Talk Around" key to select between repeater and talk
around mode. An alert tone indicates that the radio operates in talk around mode. A
different alert tone indicates that you are talking via a repeater.
Repeater/Reverse Frequency
When you are out of the communication range of the repeater and within the
communication range of your group member, you can talk with your group member by
reverse frequency if your group member is within the communication range of the
repeater.
Press programmed "Repeater/Reverse Frequency" key to select between repeater and
reverse frequency. An alert tone indicates that the radio operates in reverse frequency
mode. A different alert tone indicates that you are talking via a repeater.
Note: "Repeater/Talk Around" and "Repeater/Reverse Frequency" can't be set
simultaneously in one radio.
Power Level
Each channel of the radio is set as different power levels that are user selectable. (High
power is forbidden in certain channels).
1. High power allows your talk to be heard from further distance.
2. Low power helps to save battery power.
Press programmed "power select" key to select high/low power. An alert tone indicates
that the radio operates at high power and another alert tone indicates low power.
Scan
Scan feature allows you to monitor all channels for activity.
When scan feature is enabled, the radio will detect all channels. If an active channel is
detected, the radio will remain on that channel and you will be able to hear the
conversation. (The dealer can program a channel as scan item or non-scan-item).
12