Upper And Lower Looper - JUKI MO-114DN Instruction Manual

Threading
MO-104DN
13
1. Upper looper thread, blue markings
Place the spool on the spool holder pin as illustrated.
(1) Bring the thread up from the spool and lay it from
back to front into the guide (second from right).
(2) Take the thread with both hands and lay it in the
groove. Press the thread down into the 1st guide on
the machine until it clicks into place.
(3) Slip the thread through the groove.
(4,5,6,7,8) Thread the guides, blue markings.
(9) Turn the handwheel until the upper looper is in the po-
sition as illustrated. Thread the looper eye.
(10) Lift the presser foot, place thread underneath and
lower the presser foot.
Note:
Do not thread the upper looper when sewing with the up-
per looper converter.
MO-114DN