Setting The Clock; Advanced Water Filtration - Sunbeam PC8100 User Manual

Setting The Clock

Plug in the coffeemaker and set the current time using the hour and minute buttons. 5
seconds of inactivity will set clock at time selected.

Advanced Water Filtration

The improved 2-step advanced water filtration system reduces impurities like chlorine
and calcium to make coffee taste better.
1. Soak the advanced water filtration cartridge in cold water for 5 minutes.
2. Rinse the soaked cartridge for about 1 minute.
3. Open bottom hatch where the cartridge goes and insert a new Advanced Water Filtration
cartridge. (Figure 1)
4. Close the hatch and place system in designated slot in water reservoir.(Figure 2)
NOTE: When cleaning the coffeemaker, be sure to remove the Advanced Water Filtration
holder and cartridge.
NOTE: Replace filter cartridge frequently to ensure great tasting coffee. Contact
Sunbeam for replacement cartridges.
ILLUMINATED 4-HOUR FRESHNESS INDICATOR
before the coffee maker automatically turns off.
To continue after 4 hours, press Brew Now and the timer will reset after it attempts to
brew coffee.
The Illuminated 4-Hour Freshness Indicator feature
automatically lets you know how long your coffee has
been waiting for you. At the end of the brew cycle, the
feature will automatically be activated.
The indicator changes to show the time since brewing
began in 30 minute intervals, up to four minutes.
After 4 hours, the light will remain on for 10 minutes,
8
(Figure 1) (Figure 2)