Table of Contents
Advertisement
•
Enter an ID number (1000 ~ 4999) to make an
individual call in your fleet.
•
Enter a Fleet number followed by an ID number to
make an individual call in your desired fleet
(Inter-fleet call).
•
Select "ALL" Fleet and "ALL" ID to make a call to all
units (Broadcast call).
•
Select "ALL" Fleet and enter an ID number to make a
call to the selected ID in all fleets (Supervisor call).
Note:
Broadcast and Supervisor calls are programmed functions that
cannot be made with a keypad.
The ID range may be limited by programming.
Status Message
You can send and receive 2-digit Status messages
(10 ~ 79) which may be decided in your talk group.
Messages can contain up to 16 alphanumeric
characters.
A maximum of 9 received messages can be stored in
the stack memory of your transceiver. These saved
messages can be reviewed after reception. If the
stack memory is full, the oldest message will be
erased when a new message is received. The mail
icon (
) lights when a message is stored in the
stack memory.
Note: All stored messages will be cleared when the transceiver
power is turned OFF.
23
Advertisement
Table of Contents
