Table of Contents
Advertisement
To Review the Messages in the Stack Memory:
1 Press and hold the A key for more than 1 second
to enter Stack Mode.
•
The last received message is displayed with the
message number. "S" (Status) appears with the
number.
2 Use the encoder to select the message you want
to view (if more than one message is stored in the
stack memory).
3 Press the t t t t t B key or Cs s s s s key to stop the
message from auto-scrolling if desired. Also use
these keys to scroll through the message
manually.
4 Press the S key to toggle between the message
and the caller's ID.
5 To erase the message, press and hold the S key
for more than 1 second.
Automatic Status Response:
If you pre-select a status number and then leave the
transceier in Status Mode, the transceiver will
automatically respond with that status number when
a request from the base station is received. (The
base station request function is optional.)
25
Advertisement
Table of Contents
