Manually Install Channels - Philips 220TW9FB/05 Manual

In addition to menu language, you can
configure the following language settings via the
Languages menu (digital channels only):
• Preferred audio
one of the available audio languages as
your preferred audio language. For more
information, see Section 5.3 Adjust sound
settings.
• Preferred subtitles language:
one of the available subtitle languages as
your preferred subtitle language. For more
information, see Section 5.8 Select a subtitle
language on digital TV channels.
• Hearing impaired: If available, select On
to display the hearing impaired subtitle with
your preferred language.
• Audio description:
to hear the audio description with your
preferred language.
Step 2 Select your country
Select the country where you are located.
The TV Monitor installs and arranges channels
according to your country.
1. In the Installation menu, press ï to select
Country.
2. Press Æ to enter the list.
3. Press Î or to select your country.
4. Press Í to return to the Installation
menu.
Step 3 Install channels
Your TV Monitor searches and stores all
available digital and analogue TV channels as
well as all available digital radio channels.
1. In the Installation menu, press Î or ï
to select Channel install� > Automatic
installation.
2. Press Æ to select Start now.
3. Press OK.
4. Press the green key to start.
The installation may take a few minutes.
language: Select
Select
If available, select On
5. When the channel search is completed,
press the red key to return to the
Installation menu.
6. Press MENU to exit.
Tip
E
When digital TV channels are found, the
list of installed channels may display empty
channel numbers. If you want to rename,
reorder or uninstall stored channels, see
Section 6.3 Rearrange channels.
6�2

Manually install channels

This section describes how to search and store
analogue TV channels manually. If you want to
search and store digital channel, please kindly
refer to Section 6.7. Test digital reception
Step 1 Select your system
Note
D
Skip to Step 2 Search and store new TV
channels if your system settings are correct.
1. Press MENU on the remote control
and select Install > Channel install� >
Analogue: Manual installation.
2. Press Æ to enter the Channel
installation menu, and System is
highlighted.
3. Press Æ to enter the System list.
Channel installation
Automatic installation
Installation update
Digital: Test reception
Analog: Manual installation
Rearrange
4. Press Î or ï to select your country or
region.
5. Press Í to return to the Channel
installation menu.
PHILIPS
Analog: Manual installation
System
Search
Fine tune
Store current channel
Store as new channel
EN-25