Manually Install Channels; Rename Channels - Philips 231TE4LB/00 User Manual

Manually install channels

This section describes how to search and store
analogue TV channels manually.
Language Automatic channel update
Channel installation Channel update message
Child lock Digital: Reception test
Symbol rate mode
Symbol rate
Analogue: Manual antenna i... Analogue: Manual antenna i...
Installation mode
Step 1: Select your system
Note
•
Skip this step if your system settings are correct.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue: Manual
antenna installation] > [System], then
press OK.
3. Select the correct system for your country
or region, then press OK.
Step 2: Search and store new TV
channels
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue: Manual
antenna installation] > [Find channel], then
press OK.
• If you know the three-digit frequency
of the channel, enter it.
To search, select [Search], then press
•
OK.
EN
16
3. When the channel is found, select [Done],
then press OK.
• To store the channel as a new number,
select [Store as new channel], then
press OK.
• To store the channel as the previously
selected channel, select [Store current
channel], then press OK.
Step 3: Fine-tune analogue channels
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue: Manual
antenna installation] > [Fine-tune], then
press OK.
3. Press to fine-tune the channel.

Rename channels

You can rename channels. The name appears
when you select the channel.
1. While you watch TV, press
» The channel matrix menu is displayed.
2. Select the channel to rename.
OPTIONS.
3. Press
» The channel options menu appears.
4. Select [Rename channel], then press OK.
» A text input box appears
5. Press to select each character,
then press OK.
6. When the name is complete, select [Done],
then press OK.
Tip
• Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
FIND.