Adding Channels In Memory (Automatically) .13 Adding Channels In Memory (Manually) - Philips 64PP9751 Directions For Use Manual

ADD/DELETE CHANNELS
A
uto-Programming (see
previous page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV's memory.
1
Select CHANNEL MEMORY
(ADD/DELETE CHANNELS)
control.
With the FEATURES MENU (1
of 5) on screen, move the RED
highlight with the MENU
buttons. Then press the MENU (or
ok) button to select the feature.
2 Press the CHANNEL (+)/(-)
(or number buttons on the Pronto's
touchscreen 2 of 5) to select the
channel you want to add or delete.
3
Press the MENU button to
ADD the channel into the TV's
memory.
Press the MENU button to
DELETE the channel from
memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete.
4
Press the Exit button to clear the
screen when through.
S H
MART ELP
Remember. A separate
ADD/DELETE CHANNEL
memory may also be created for
the ANT(enna) B Input on the rear
of the set (if an Antenna or Cable
TV signal has been connected).
Press the "SOURCE" button on
the remote, while in the
ADD/DELETE CHANNEL
mode, to switch between the ANT
A and ANT B channel memory
lists. Then follow steps 2 and 3 as
shown above to add or delete the
desired channels.
F M
EATURE ENU
MAIN MENU
PICTURE
FEATURES
1ST TIME SETUP
DN
1
Menu
ok
Exit
3/5 INFO
4
C (
ONTROLS CONTINUED
SOUND
EXIT
mute
channel
HDR PTV + +
Source
volume
+ + 2
A/CH
1
3
14
)
FEATURE MENU
ANALOG
CABLE
FORMAT
TUNING
CLOSED
CHANNEL
CAPTIONS
MEMORY
EXIT MORE...
1 OF 5
CHANNEL MEMORY
ADD/DELETE
CHANNELS
START
AUTO-PROGRAMMING
EXIT
ADD/DELETE CHANNEL
Channel 19 Added
for ANT A
SELECT CHANNEL
to DELETE CHANNEL
for ANT B
SOURCE
M when FINISHED