3
Get started
This section helps you position and install the
TV Monitor and supplements the information
provided in the Quick Start Guide.
Note
D
Refer to the Quick Start Guide for stand
mounting instructions.
3�1
Position the TV Monitor
In addition to reading and understanding the
safety instructions in Section 1.1, consider the
following before positioning your Product:
•
The ideal viewing distance for watching TV
is three times its screen size.
•
Position the Product where light does not
fall on the screen.
•
Connect your devices before you position
your Product.
• Your Product is equipped with a Kensington
Security Slot at the back. If connecting an
anti-theft Kensington lock (not supplied),
position the Product within reach of a
permanent object (such as a table) that can
be easily attached to the lock
3�2
B
Step 1 Purchase a VESA-compatible wall
bracket
Depending on the size of your TV Monitor
screen, purchase one of the following wall
brackets:
TV Monitor
screen size
(inches/cm)
22"/55.9cm
19"/48.4cm
Step 2 Remove the stand
D
1.
DIGITAL AUDIO OUT
EXT 3
2.
Wall mount the TV Monitor
WARNING
Wall mounting of the TV Monitor
should only be performed by
qualified installers. Koninklijke
Philips Electronics N�V� bears no
responsibility for improper mounting
that results in accident or injury.
VESA-
compatible wall
bracket type
(millimeters)
Fixed 100 x 100
Fixed 100 x 100
Note
These instructions are only applicable to
TV Monitor models with mounted stands.
If your stand is not mounted, skip to Step 3
Connect cables.
Carefully place the TV Monitor face down
on a flat, stable surface that is covered by
soft cloth. The cloth should be thick enough
to protect your screen.
Using a cross-head screwdriver (not
supplied), unscrew the four bolts that
secure the stand to the Product. (19" has
four bolts, 22" has three bolts)
Special
instructions
None
None
EN-7