Table of Contents
Advertisement
Introduction for buttons on remote controller
10
TEMP button
Press this button can see indoor set temperature, indoor ambient temperature or
outdoor ambient temperature on indoor unit's display. Temperature is set circularly
by remote controller as below:
● When selecting "
indoor unit displays set temperature.
● When selecting "
displays indoor ambient temperature.
● When selecting "
displays outdoor ambient temperature.
Note:
● Outdoor ambient temperature display may can't be selected for some models.
When indoor unit receives "
● Only for the model whose indoor unit has dual-8 display.
11
TIMER-ON button
Press this button to initiate the auto-ON timer. To cancel the auto-timer program,
simply press this button again.
After press of this button,
ON time setting. Within 5 seconds, press + or - button to adjust the time value.
Every press of either button changes the time setting by 1 minute. Holding down
either button rapidly changes the time setting by 1 minute and then 10 minutes.
Within 5 Seconds after setting, press TIMER ON button to confirm.
12
CLOCK button
Press CLOCK button,
the present time. Holding down either button above 2 seconds increases or
decreases the time by 1 minute every 0.5 second and then by 10 minutes every
0.5 second. During blinking after setting, press CLOCK button again to confirm the
setting, and then
13
TIMER-OFF button
Press this button to initiate the auto-off timer. To cancel the auto-timer program,
simply press the button again. TIMER OFF setting is the same as TIMER ON.
no display
" by remote controller or no display, temperature indicator on
" by remote controller, temperature indicator on indoor unit
" by remote controller, temperature indicator on indoor unit
" signal, it displays indoor set temperature.
disappears and "ON" blinks. 00:00 is displayed for
blinking. Within 5 seconds, pressing + or - button adjusts
will be constantly displayed.
10
Advertisement
Table of Contents
