Table of Contents
Advertisement
Introduction for buttons on remote controller
5
FAN button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
,
, to
, then back to Auto.
Low speed
6
SWING button
Press this button to set up &down swing angle, which circularly changes as below:
This remote controller is universal. If any command
will carry out the command as
indicates the guide louver swings as:
7
I FEEL button
Press this button to turn on I FEEL function. The unit automatically adjust tempera-
ture according to the sensed temperature. Press this button again to cancel I FEEL
function.
8
/
button
Press this button to achieve the on and off of healthy and scavenging functions in
operation status. Press this button for the first time to start scavenging function;
LCD displays "
scavenging functions simultaneously; LCD displays "
button for the third time to quit healthy and scavenging functions simultaneously.
Press the button for the fourth time to start healthy function; LCD display "
Press this button again to repeat the operation above. (This function is applicable
to partial of models)
9
SLEEP button
Press this button to go into the SLEEP operation mode. Press it again to cancel
this function. This function is available in COOL, HEAT (Only for models with
heating function) mode to maintain the most comfortable temperature for you.
Auto
OFF
". Press the button for the second time to start healthy and
Medium speed
9
High speed
,
or
is sent out, the unit
" and "
". Press this
".
Advertisement
Table of Contents
