Page 1
ASSEMBLY INSTRUCTIONS Description : 36 IN ROUND PED TABLE Item No. : T-36RP ITEM NO : T-36RP Printed in Vietnam REVISED MAR 07, 2015 - 1 -...
Page 2
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Center leg Right leg Left leg Mounting Wood slide plate ITEM NO : T-36RP Printed in Vietnam REVISED MAR 07, 2015 - 2 -...
Page 3
Attach right leg (C) to the center leg (B) and left leg (D) with Long bolts (1) and washers (2) and (3), as shown below. Tighten with the Allen key (6). ITEM NO : T-36RP Printed in Vietnam REVISED MAR 07, 2015...
Page 4
Carefully place the base (from step 2) on the bottom side of the top (A). Attach the mounting plate to top (A) with short bolts (5) and washers (2) and (4). Tighten with Allen key (6). ITEM NO : T-36RP Printed in Vietnam...
Page 5
Then, gently lower the leaf and place in the down position. ITEM NO : T-36RP Printed in Vietnam...
Need help?
Do you have a question about the T-36RP and is the answer not in the manual?
Questions and answers