Panasonic CS-W18NKD Operating Instructions Manual page 8

REMOTE CONTROL
Press and hold for 5 seconds to dim or restore the
10
unit's indicator brightness.
Press and hold for approximately 10 seconds to
11
show temperature setting in °C or °F.
12 Press to restore the remote control's default setting.
13 Not used in normal operations.
TIMER
ON
10
11
OFF
13
SET
8
SET
1 2 3
CANCEL
CLOCK RESET
TO SET THE TIMER TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
1
OFF
Select ON or
OFF timer
• To cancel ON or OFF timer, press
press .
CANCEL
• When ON Timer is set, the unit may start earlier (up
to 30 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
12
on the back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
TIMER
2
SET
Set the time Confi rm
ON
or
OFF
SET
.
then